Please enjoy this short video of our manually operated waterwall on a dark blue glass plane.
This is the transcription of my voice in this video:
Hello Guys,
a couple of years ago we have produced this wonderful, beautiful water feature, which is on the floor in a very, very exclusive house.
I will show you some pictures in a few seconds and take you look at this environment. So, it's a really very exclusive customer, very very beautiful water feature. And here you can see how beautiful it was when it was finished. And i really have to tell you : It is incredibly beautiful.
So, having said this, we have .., well actually it's not us who have had this misery, but something really ugly happened and this is why you should always take care of a non-return-valve, because the customer here ... you know, if that is the water feature in this area, then in the garage was the water technology stored, in a pumping sump.
Let me show you just a picture of that, ok, so here you can see a local plummer who just is in the pumping sump where we have stored all the pumps and water treatment,...
We have just setup a 6m high thread fountain, see the test run in the video.
This is the transcription of my voice in this video:
Hello again to the Wawazen Waterwall School. Today I've been at a customer's place examining, well not examining, but taking samples because we have those crystalline sticky stuff here in this thread fountain which is causing the pump to be damaged. The rotor is completely stuck and you cannot repair this. So actually it's the third pump which is damaged due to this sticky crystalline stuff where we don't know where it comes from and that's the reason why I've been there today. So usually I thought, you know, taking water samples is just super simple. You just go there and take a half a liter or one liter and bring it to the laboratory or send it there.
But no, they supplied me with six different bottles and each, well those those are simple: you just fill in the water, but you have to take care that there is no air inside. Then those two, they had some special chemicals in it which then ..., yeah, we'll come on ...,...
We tested this thread fountain with LED lights in the frame. Please have a look.
Soothing, isn't it ?
This symbol of fruitfulness.
Please do not laugh at this water feature ... if you can !
This is the transcription of my voice in this video:
In this video I want to show you our test, which we have made, with natural tile stones in order to create a water wall. So the customer asked us to plan a water wall and so we did what we always do and what we really recommend, we tested those natural stone tiles before we did the planning and the installation. And there are actually the two most important things are here splashing and free falling drops and the color of the stone.
Let's just begin with splashing. So we have tested the water distribution with different amounts of water, well, it's not precise but it's just a volume of water which we have driven across the surface and you can see here at 25 percent, well, it's barely covering the whole thing. Then we opened the pump a little bit and, I think, this has been the best setting with 50%. 75% creates too much streams and I would say it's too much and 100 percent is far too much.
So, okay, so we have found out that the...
This is a video of a glass water wall built into a stairway, which i took when it was not yet finished. But, i think, it already was an amazing indoor waterfall.
This is the transcription of my voice in this video:
In this video I'm going to show you the most common problems when installing a water feature pump, which is that the pump has air inside and then it doesn't work.
So let's say if you have a container or a tank, this is your water level and this is a pump like that, so it's a pretty big pump, and here would be the sucking side and here's the pressure side. So, what happens if you put a pump into the water and you have the sucking side below then there will still remain air here inside the pump. So, when you start the pump the rotor or the propellers in here they just, because they they're not covered with water, they will not be able to transport the water. So, even if it's ... so, when the first time when you put a pump into your tank you should take care that the sucking side is from above so that the air could get out and the water could get in the pump. So, when, then when you turn it on it will immediately be filled with water...
50% Complete
Step #1: Please enter your email address.
Step #2: Check your inbox and confirm your email adress. After that you will recieve instantly your login to the free course and the link to the free ebook!